Changing The Sequence Title; Naming Files Generated By A Sequence - HP 8753E User Manual

Changing the Sequence Title

If you are storing sequences on a disk, you should replace the default titles (SEQl, SEQ2 . . . ).
1. To select a sequence that you want to retitle, press:
. . . . . . . ~ . ~ ~ ~ . ~ . ~ ~ ~ . " . ~ ~ ~ ~ ~ . ~ ~ . . . . : : ~ ~ ~ . . .
The analyzer shows the available title characters. The current title is displayed in the
upper-left corner of the screen.
2. You can create a new filename in two ways:
If you have an attached DIN keyboard, you can press @J and then type the new lilename.
n
. If you do not have an attached DIN keyboard, press ~~~~~_ and turn the front
panel knob to point to the characters of the
you stop at each character.
The analyzer cannot accept a title (llle name) that is longer than eight characters. Your titles
must also begin with a letter, and contain only letters and numbers.
3.

Naming Files Generated by a Sequence

The analyzer can automatically increment the name of a gle that is generated by a sequence
using a loop structure. (See example "Generating Piles in a Loop Counter Example Sequence"
later in this chapter.)
To access the sequence lilename menu, press:
This menu presents two choices:
the Title Pile Menu.
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. ~~~~~~~~~~~~~~ suppKes a nme for the plot He generated by a p~ot-to-&sk commd.
. . . . . . . .. ; : . . . . . . . . =: . . . . . . . . : . . a . . . . . . 2: ; . . . . . . . . . . =. . : . . : . . . A . . . . . . ~wu; . . . i . . . . . . . A : : . . , , . : . . , . ; , . , . , . . . , . . . . ; ~ . . . . . , , ~ . . . . . . , . , . , i . . ~ ~ . i . . .. . . . . . . . . . . . . . .
This also brings up the Title Pile Menu.
The above keys show the current filename in the 2nd line of the softkey.
When titling a llle for use in a loop function, you are restricted to only 2 characters in the
lllename due to the 6 character length of the loop counter keyword y [LOOP]. n When the tie is
actually written, the [LCCP] keyword is expanded to only 5 ASCII characters (digits), resulting
in a 7 character lllename.
After entering the 2 character fllename, press:
new tiename, pressing ~~~~~~: as
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . ~ . ~ . / . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i i : . . ; : . i . s . . ;
Making Measurements 2-73