HP 8753E User Manual page 661

VAR_LIST_BEGIN
DATA
CONSTANT
The ClTlfile Data Format and Keyword Reference
VAR_LIST_BEGIN indicates that a list of the values for the independent
variable (declared in the VAR statement) follow. Only the MAG format
is supported in revision A.O1.OO.
VAR_LIST_END defines the end of a list of values for the independent
variable.
DATA S Cl, 1] RI defines the name of an array of data that will be read
later in the current CITIllle package, and the format that the data will
be in. Multiple arrays of data are supported by using standard array
indexing. Versions A.01.00 and A.O1.O1 of CIl'Iftle
RI (real-and imaginary) format, and a maxhnum of two z
Commonly used array names include the following:
"E" for "Error term"
"USER" for "User parameter"
voltages (AR).
CONSTANT Enamel [value] allows for the recording of values which
don't change when the independent variable changes.
to create your own KEYWORD instead. The #NA device specification is
an example of this.
No constants were dellned for revision A.O1.OO of CITIfile. CITIllle
revision A.O1.O1 defined the following constant:
CONSTANT TIME [year] [month] [day] [hour] [min] [sets]
Example:
C O M M E N T
recommended to aid readability.
The year should always be the full four digits (" 1991" is correct, but
n
"91" is not). 'I'hls is to avoid problems with the year 2000, when the
shortened version of the year will be "00."
The hour value should be in 24-hour "military" time.
n
When writing a CITIflle and the fractional seconds value is zero, then
n
the "seconds" value may be printed either with or without a decimal
point: either "47.0" or "47" would be acceptable. When reading
a CITIllle, the seconds value should always be read as if it were a
floating point number.
support the
ray indexes.
Example: S[Z, l]
Example: E[ l]
Example: USER[
1
Example: VOIXAGE[ l]