HP 8753E User Manual page 217

f. Press m and select one of the following:
peripheral access operations.
q Choose :~~~~~~~~ to allow yowself to control the analyzer Over HP-IB and also
allows the analyzer to take or pass control.
4 . press (--) :~~:~~-~~~~~~~~~~ .
5.
Define the save by selecting one of the following choices:
to disk in IEEE-64 bit real format (for LIF disks), and 32 bit PC format for DOS disks This
makes the DOS data illes half the size of the LIF files.
Note
See "ASCII Data Formats. '
HP 87533 Network Aruzlgm
graphics.) The measurement display is not saved with this selection. (Refer to the
information located earlier in this chapter for a procedure that shows you how to plot
measurement displays to disk.)
Note
6. Choose the type of format you want:
q
q ' Choose ~~~~~~~~~~~~~ for CITIfile, s2p, and cAE applications or when you want to
import the information into a spread sheet format.
Printing, Plotting, and Saving Measurement Results
. . . . a
. . . . . . . . /
Programmer's
. IL:
store data to disk in the S2P ASCII data format.
,