Plotting A Measurement To Disk; Automatic File Naming Convention For Lif Format - HP 8753E User Manual

Plotting a Measurement to Disk

The plot llles that you generate from the analyzer, contain the HPGL representation of the
measurement display. The files will not contain any setup or formfeed commands.
1. Configure the analyzer to plot to disk.
Press
The analyzer assigns the first available default lilename for the displayed directory. For
example, the analyzer would assign PLOTOOFP for a LIF format (PLOT00 . FP for a DOS
format) if there were no previous plot files saved to the disk.
The figure below shows the three parts of the file name that is generated automatically by
the analyzer whenever a plot is requested. The two digit sequence number is incremented
one
by each time a file with a default name is added to the directory.
Figure 4-8. Automatic File Naming Convention for LIF Format
O U T P U T F O R M A T C O D E T H A T I N D I C A T E S T H E P L O T
Q U A D R A N T P O S I T I O N O R F U L L P A G E .
P L O T F I L E S S E Q U E N C E N U M B E R (00 T O 3 1 )
R O O T O F F I L E N A M E
Printing, Plotting, and Saving Measurement Results