HP 8753E User Manual page 626

All copy configuration settings are stored in non-volatile memory. Therefore, they are not
affected if you press @GZj or switch off the analyzer power.
If the Peripheral is a Printer
appears:
q
Note
Selecting ~~~~.,~ converts 100 dpi raster information to 300 dpi raster format.
If your DeskJet printer does not support the 100 dpi raster format and your
printing results seem to be less than normal size, select ~,~~~~.
2. Select one of the following printer interfaces:
a. Enter the HP-IB address of the printer, followed by ml.
the HP-IB bus.
. . . . .
c. Press @ and ~~~~~~~~~~~~~~~ if there is an external controller connected to the
HP-IB bus.
the print function as follows:
q ness m and then sele& the parmel pofi interface fun&ion by pressing ~~~
until the correct function appears:
. If you choose ~~~~~~~,~ the partiel port is dedi.ated for nomd copy
device use (printers or plotters).
n
I/O, and cannot be used for printing or plotting.
. . . , . . , . . , . , _ . . . _ _ , . _ . , . . . . . .
. . _ ~ . , . : . : . : . ~ : . : . : . : . : . : . : . : . : . : . : . : . . : . . . : . : . . . : . :
. . . . . . . . . . ~ : . z . . > ; ; ; . . . . A . . s . ; . . ; ; > ; > . . . . . . . . . . . w . . : : : . . . . : : . . . r . ii
. . . . . . . . . . . . . . . . . . . . . : . : . : . : . . . : : . : . : . : . : . : . : i
. . . . . . . . . .
. . . I _ . . . . . . . . . . . . . . .. . . . . . . . . ~ . . . . . . . . . . . . . . . . . . i : : : : . . 2; ; . : . . : . . : . . . . . . . ws . ; ; . . . . . . . . . . . C. ; ; ; . i . . . . '
. . . . . . .
. . . . . . . . . . . . . . . , ; . , . . . ; . , . ,
Compatible Peripherals 1 l-9