Loading A Sequence From Disk; Purging A Sequence From Disk; Printing A Sequence - HP 8753E User Manual

Loading a Sequence from Disk

For this procedure to work, the desired file must exist on the disk in the analyzer drive.
1. To view the first six sequences on the disk, press:
If the desired sequence is not among the Rrst six files, press:
n
:: . > ; . . <hX . > . . , , . , , , , , , . , . : , . . , , , . . ../ .I: T i . . . , . . . C T . . . . . . : < < : < . . . . . . . . . . : : . : > . . . ' . . G . . . . . . . . .
2. Press the softkey next to the title of the desired sequence. The disk access light should
illuminate briefly.
If you know the title of the desired sequence, you can title the sequence (l-6)
Note
with the name, and load the sequence. This is also how you can control the
sequence number of an imported titled sequence.

Purging a Sequence from Disk

1. To view the contents of the disk (six titles at a time), press:
sequence is not among the first six llles, press:
desired
2. Press the softkey next to the title of the desired sequence. The disk access light should

Printing a Sequence

1. Configure a compatible printer to the analyzer. (Refer to Chapter 11, "Compatible
Peripherals. ")
2. To print a sequence, press:
If the sequence is on a disk, load the sequence (as described in a previous
Note
procedure) and then follow the printing sequence.
Making Measurements 2.75