HP 8753E User Manual page 188

a. Enter the HP-IB address of the printer (default is 01), followed by @).
the HP-IB bus.
c. Press LLocal) and :#N!@&&$ ,,CQ#&&$ if there is an external controller connected to the
HP-IB bus.
the print function as follows:
Press m and then select the parallel port interface function by pressing j&&@@$#Z
q
until the correct function appears.
device use (printers or plotters).
I/O, and cannot be used for printing or plotting.
n
function as follows:
b. 'lb select the transmission control method that is compatible with your printer, press
appears.
data exchange by transmitting control characters to the network analyzer.
exchange by setting the electrical voltage on one line of the RS-232 serial cable.
Note
Printing, Plotting, and Saving Measurement Results
. . . : . . . . . . . *.i;l i . . . . . . . A . . s . . . . . . .
by
method