Mass Storage - HP 8753E User Manual

HP C1676A, DeskJet 1200C (can also be used to plot)
n
HP C354OA, DeskJet 1600C (can also be used to plot)
n
n
HP 2227B QuietJet
n
HP 2225A ThinkJet
n
HP 3630A Pain&Jet Color Graphics Printer
n
Epson printers which are compatible with the Epson ESC/P2 printer control language, such
as the LQ570, are also supported by the analyzer. Older Epson printers, however, such as the

Mass Storage

The analyzer has the capability of storing instrument states directly to its internal memory,
to an internal disk drive, or to an external disk drive. The internal 3.5 inch floppy disk can
be initialized in both LIF and DOS formats and is capable of reading and writing data in both
formats. Using the internal disk drive is the preferred method, but the capability to use
external disk drives still exists. Most external disks using CS80 protocol are compatible.
Note
The analyzer does not support the LIF-1 (hierarchy llle system) directory
format.
Caution
Do not use the older single-sided disks in the analyzer's internal drive.
HP-IB Cables
An HP-IB cable is required for interfacing the analyzer with a plotter, printer, external disk
drive, or computer. The cables available are:
HP 10833A HP-IB Cable, 1.0 m (3.3 ft.)
n
HP 10833B HP-IB Cable, 2.0 m (6.6 ft.)
n
HP 10833D HP-IB Cable, 0.5 m (1.6 ft.)
n
Interface Cables
HP C2912B Centronics (Parallel) Interface Cable, 3.0
n
HP C2913A RS-232C Interface Cable, 1.2 m (3.9 ft.)
n
HP C2914A Serial Interface Cable, 1.2 m (3.9 ft.)
n
HP 24542G Serial Interface Cable, 3 m (9.9 ft.)
n
HP 24542D Parallel Interface Cable, 2 m (6 ft.)
n
HP 92284A Parallel Interface Cable, 2 m (6 ft.)
n
m (9.9
ft.)
Compatible Peripherals 11-6