Step 4. Measure The Device Under Test; Step 5. Output The Measurement Results - HP 8753E User Manual

Caution Do not mistake the Iine switch for the disk eject button. See the figure below.
If the Iine switch is mistakenly pushed, the instrument wiIi be turned off,
losing ah settings and data that have not been saved.
Step Measure the device under test.
4.
11. Replace any standard used for error-correction with the device under test.
12. To measure the insertion loss of the bandpass filter, press:
Step 6. Output the measurement results.
13. 'Ib create a hardcopy of the measurement results, press:
Refer to Chapter 4, 'Printing, Plotting, and Saving Measurement Results," for procedures
on how to define a print, plot, or save. For information on configuring a peripheral, refer
to Chapter 11, "Compatible Peripherals. n
Making Measurements 2-5