Transistor Test Fixtures - HP 8753E User Manual

Transistor Test Fixtures

The following Hewlett-Packard transistor test fixtures are compatible with the HP 8753E.
Additional test fixtures for transistors and other devices are avaiIable from Inter-Continental
Microwave. lb order their catalog, request HP literature number 5091-4254E. Or contact
Inter-Continental Microwave as follows:
1515 Wyatt Drive
Santa Clara, CA 95054-1524
(tel) 408 727-1596
(fax) 408 727-0105
HP 11600B and 11602B lkansistor Fixtures.
These IIxtures are used to hold devices for S-parameter measurements in a 50 ohm coaxial
circuit. They can be used to measure bipolar or field-effect transistors in several confIgurations,
from dc to 2.0 GHz. The HP 11600B accepts transistors with TO-18 to TO-72 package
dimensions, and the HP 11602B accepts transistors with To-5 to TO-12 package dimensions.
Both IIxtures can also be used to measure other circuit elements such as diodes, resistors, or
inductors, which have 0.016 to 0.019 inch diameter leads.
HP 11608A Option 003 Transistor Fixture.
This IIxture is designed to be user-milled to hold striphne transistors for S-parameter
measurements Option 003 is pre-miIIed for 0.205 inch diameter disc packages, such as the
HP HPAC-200.
HP 11868A Transistor Fixture Adapter.
This adapter provides a rigid RF cable interconnection between the HP 8753E test port
connectors and the HP 116OOB, 11602B, or 11608A transistor llxture.
Power Limiters
The following power limiters are designed to protect the analyzer from damage due to
excessive input power.
Type-N, DC Blocked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP 11930B
Compatible Peripherals 11-3