Dual Channel Displays - HP 8753E User Manual

Dual Channel Mode
single graticule (see Figure 6-23a)
With .EQH$%%A# set to ON and ~&&ET DISP set to 2X or 4X, the measurement data is
n
displayed on two half-screen graticules, one above the other, (see Figure 6-2313).
Current parameters for the two displays are annotated separately.
The stimulus functions of the two primary channels can also be controlled independently
using ..~~~~~~~~~:~:a~. off in the stimulus menu.
independently for each channel using ?HH@El@z, #&$HE%,~. in the marker mode menu.
with other softkeys in the c-1 menu to produce different displays See "Customizing the
Display" later in this chapter, or "Using the Four-parameter Display Mode" in Chapter 2.
(a) Overlaid Traces
By decoupling the channel power or port power and using the dual channel mode, you can
simultaneously view two measurements (or two sets of measurements , if both auxiliary
channels are enabled), having different power levels
set to 1X, the two traces are overlaid on a
Figure 6-23. Dual Channel Displays
addition, the markers can be controlled
In
. . . i i
(b) Split Display
Application and Operation Concepte 6 4 3