HP 8753E User Manual page 628

. . . . ..A. L. . . . . .
the print function as follows:
q
until the correct function appears:
. If you choose j~~~~~~~~~,~
device use (printers or plotters).
If you choose :3r~~~~~~~~~~~~~. the parallel port is dedicated for general purpose
n
I/O, and cannot be used for printing or plotting.
Choose #@l%&& if your printer has a serial (RS-232) interface, and then configure the print
function as follows:
. . . . . . . - - i . . ~ . . . . . . . ; ; ~ . - l . . . > u>: . . : : . . . : : . . . i i . . ~ . i . . i . . . . . . i i . : : : . . A . : > n: : : : . -
b. lb select the transmission control method that is compatible with your printer, press
appears:
If you choose ~&&j$@J@, the handshake method allows the printer to control the
q
data exchange by transmitting control characters to the network analyzer.
If you choose ~~~~~~. the handshake method allows the printer to control the data
. . . . . .
q
exchange by setting the electrical voltage on one line of the RS-232 serial cable.
Because the ~~~~~~~ handshake takes place in the hardware rather than the
. . . . . . . . . . . . . . . . . )
Compatible Peripherals 11-11