Marker Information Moved Into The Softkey Menu Area - HP 8753E User Manual

If marker information obscures the display traces, you can turn off the softkey menu and move
the marker information off of the display traces and into the softkey menu area. Pressing the
backspace key @ performs this function. This is a toggle function of the backspace key. That
is, pressing @ alternately hides and restores the current softkey menu. The softkey menu is
also restored when you press any softkey or a hardkey which leads to a menu.
1. Set up a four-graticule display as described in "Using the Four-Parameter Display Mode. n
Observe that the markers appear on all of the grids. 'Ib activate markers on
Note
individual grids, press (jj] '~:~~~~~~~~~, and set ~~~ to
UNCOUPLED. Then, activate the channel in which you wish to have markers,
press e, then select the markers for that channel.
3. Turn off the softkey menu and move the marker information off of the grids: Press @
The display will be similar to Figure 2-10.
5 dB.' R E F - 2 dB
CENTR 134.000 MHz SPAN 45.000 MHz
1 0 dB.' R E F - 5 0 dB
t i i i'Yi I
C E N T R 1 3 4 . 0 0 0 M H z S P A N 4 5 . 0 0 0 M H z
Figure 2-10. Marker Information Moved into the Softkey Menu Area
2 Sep 1 9 9 8 12:12: 0 9
LOG
C E N T R 1 3 4 . 0 0 0 M H z SPfiN 4 5 0 0 0 M H z
4 : - 2 . 1 1 3 2 dB 1 5 1 . 5 0 9 5 0 0 M H z
- 2 3 . 3 1 6 dB
- 2 2 . 9 2 8 dB
CENTR 134.000 MHz SPAN 45.000 MHz
10 REF -50
Making Measurements 2-19
116.88200 MHz
2 : - 2 3 . 4 8 1 dB
129.46850 MHz
139.97600 MHz
116.88200 MHz
129.46850 MHz
139.97600 MHz