Analyzer Display
Figure 1-2. Analyzer Display (Single Channel, Cartesian Format)
The analyzer display shows various measurement information:
The grid where the analyzer plots the measurement data.
n
The currently selected measurement parameters.
n
The measurement data traces.
n
Figure l-2 illustrates the locations of the different information labels described below.
In addition to the full-screen display shown in Figure l-2, multi-graticule and multi-channel
displays are available, as described in "Using the Four-Parameter Display Mode" in Chapter 2,
"Making Measurements. *
Several display formats are available for different measurements, as described under "(jj)"
in Chapter 9, "Key Definitions"
Stimulus Start Value. This value could be any one of the following:
1.
The start frequency of the source in frequency domain measurements.
n
The lower power value in power sweep.
n
When the stimulus is in center/span mode, the center stimulus value is shown in this
space. The color of the stimuhis display reflects the current active channel.
DATA DISPLAY
AREA
HP 6753E Description and Options