HP 8753E User Manual page 136

8. To access the gate function menu, press:
9. To set the gate parameters, by entering the marker value, press:
10.
11.
As shown in Figure 2-60, only response from the main path is displayed.
You may remove the displayed response from inside the gate markers by
Note
pressing ;Sga:' and turning the front panel knob to exchange the "flag" marker
positions
Gating
select between minimum, normal, wide, and maximum. Each gate has a different passband
flatness, cutoff rate, and sidelobe levels.
Figure 2-60.
a Time Domain Transmission Example Measurement
center gate marker.
"T"