Using Freelance; Outputting Plot Files From A Pc To A Plotter - HP 8753E User Manual

Using Freelance

1. From the FILE pull-down menu, select IMPORT.
2.
Set the file type in the dialog box to HGL.
Note
The network analyzer does not use the sulllx *.HGL, so you may want to
change the tllename filter to *. * or some other pattern that will allow you to
locate the llles you wish to import.
3.
Click OK to import the file.
You will notice that when the trace is displayed, the text annotation will be illegible. You
n
can easily ti this with the following steps:
a. From the TEXT pull-down menu select FONT.
b. Select the type face and size. (Fourteen point text is a good place to start.)
c. Click OK to resize the font.
wish
to modify the color of the displayed text, perform the following steps:
a. From the ARRANGE pull-down menu select UNGROUP.
b. Highlight a piece of text.
c. From the STYLE pull-down menu select ATTRIBUTES.
d. Select the desired text color and click OK.
e. Repeat steps b through d for each piece of text.

Outputting Plot Files from a PC to a Plotter

1. Connect the plotter to an output port of the computer (for example, COMl).
2. If using the COMl port, output the llle to the plotter by using the following command:
Printing, Plotting, and Saving Measurement Results