6
Position the printer on its left side.
Warning—Potential Damage: The ADF might swing open while you position the printer on its side.
7
Remove the power supply. See
8
Remove the duplex assembly. See
9
Remove the pick roller assembly. See
10
Remove the three screws (A).
11
Disconnect the cable (pick motor) from the assembly.
12
Remove the assembly.
Sensor (toner density) removal
1
Remove the rear cover. See
2
Remove the power supply. See
3
Remove the duplex. See
4
Position the printer on its left side.
"Power supply removal" on page
"Duplex removal" on page
"Pick roller assembly removal" on page
A
"Rear door and cover removal" on page
"Power supply removal" on page
"Duplex removal" on page
Parts removal
273.
275.
295.
273.
275.
283
7018
280.