18
ENGINE
18.3.22 Removing the reed valve housing
18.3.23 Removing the left engine case section
18.3.24 Removing the shift rails
–
Remove screws
–
Take off the intake flange.
308172-10
–
Remove reed valve housing
–
Take off the gasket.
308173-10
–
Remove screws
–
Tilt the left section of the engine case upward and remove the screw connections of
the engine fixing arm.
–
Loosen the left section of the engine case by striking it lightly with a plastic ham-
mer and remove it.
Info
Do not pry it apart with screwdrivers since the sealing areas are easily dam-
aged.
308174-10
–
Remove engine case gasket
308175-10
–
Remove shift rails
308176-10
.
1
.
2
.
1
.
2
with the springs.
1
142