Removing The Locking Lever; Removing The Left Section Of The Engine Case; Removing The Shift Rails - KTM 450 SX-F EU Repair Manual

301DISASSEMBLING THE ENGINE
129
- Unscrew and remove together with locking lever ,washer, sleeve and spring.
ilia laft action
of
ilia alllina casa
- Remove screws
- Remove screws
- Tilt the left section of the engine case upward and remove the threaded fasteners
of the engine fixing arm.
- Insert the special tool into the crankshaft.
I
Protection cover (75029090000) ( .. p. 231)
- Mount special tool with the appropriate screws.
I
Extractor (75029048000) ( .. p. 231)
• Info
I
Use the drill hole marked with 773.
- Take off the section of the engine case.
• Info
I
Do not subject the section of the engine case to any stress.
The washer of the main shaft usually adheres to the bearing.
- Take off the left section of the engine case.
- Remove the special tool.
RemDYinlllle shift rails
- Remove shift rails together with upper springs and the lower springs.