15.7
Installing the headlight mask with the headlight
15.8
Changing the headlight bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Main work
–
Join plug-in connectors
S01328-11
–
Position the headlight mask and secure it with rubber
2
straps
.
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line
guide.
V01782-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
socket counterclockwise all the way and remove it.
–
Pull bulb socket
V01783-10
ELECTRICAL SYSTEM 15
1
.
p. 122)
1
together with the underlying bulb
2
of the position light out of the reflector.
p. 120)
121