The 2Nd Analog Superimposed Value; The 2Nd Motor Capacity; The 2Nd Motor Pole Number - Panasonic VF200 Instruction Manual

nd
P157 The 2
Bias value can be superimposed to the 2
parameter.
Name
nd
The 2 Analog
Superimposed
Value
Related parameters: P124, P126 to P127
·For setting method, please refer to "P124: The 2
Select".
nd
P158 The 2
・During vector control or when auto torque boost or slip compensation is
performed through V/F control, inverter capacity used to drive the motor can
be set.
·Related setting values are the same as the those of 1
parameter "P130: Motor Capacity".
·If data is changed, the setting values of parameter "P160: The 2
Compensation Constant" and "P161: The 2
will be automatically changed to motor constants recommended by our
company.
nd
P159 The 2
・During vector control or when auto torque boost or slip compensation is
performed through V/F control, pole number required to drive the motor can
be set.
·Related setting values are the same as the those of 1
parameter "P131: Motor Pole Number".
Analog Superimposed Value
－100.0% to ＋100.0%
Motor Capacity
Motor Pole Number
Appendix Function Parameter List
nd
analog input value with this
Setting range
nd
Analog Input Function
nd
Slip Compensation Frequency"
st
motor. Please refer to
nd
Voltage
st
motor. Please refer to
267