Pwm/Pulse Input Frequency Signal Select; Connection And Function Descriptions Of Control Circuit Terminals; The Relationship Between Pwm Signal And Frequency Command Value; The Relationship Between Pulse Signal And Frequency - Panasonic VF200 Instruction Manual

Appendix Function Parameter List
P087

PWM/Pulse Input Frequency Signal Select

PWM/Pulse Input signal from PLC etc. can be used to control the operating frequency.
(However, the allowable PWM signal cycle ranges from 0.9 ms to 1100 ms.)
Setting value
0
1
2

■ Connection and function descriptions of control circuit terminals

■ The relationship between PWM signal and frequency command value

■ The relationship between pulse signal and frequency

Please set pulse input value per second when the output frequency is max in
parameter "P174: pulse input signal frequency".
When set parameter P005 to "50" or "60", the max output frequency is "50Hz"
·
or "60Hz", and when the value is "FF" or "3C", the max output frequency is the
value of parameter P008.
· If parameter P005 is set to "50" or "60", the maximum output frequency will
be "50 Hz" or "60 Hz" respectively; if set to "FF" or "3C", the maximum output
frequency w ill be the value of parameter P 008.
· The allowable PWM signal cycle r anges from 0.9 ms to 1100 ms.
· When P087 = 1, the settings of "P039: SW4 Function Select" and "P040:
SW5 Function Select" are invalid.
Related parameters: P005, P008, P088, P089
210
Details
PWM frequency signal
select disabled
PWM frequency signal
Pulse input
frequency signal
PWM signal
Pulse signal
*When PWM/Pulse Input frequency signal is
selected, functions of SW4 (terminal No.7)
and SW5 (terminal No.8) will be used by PWM
or pulse control exclusively.
PWM/Pulse input frequency signal
PWM/Pulse