Panasonic VF200 Instruction Manual page 215

Appendix Function Parameter List
st
P071
The 1
nd
The 2
P072
rd
The 3
P073
th
The 4
P074
Runtime at the 1
"4" in "P045: Multi Speed Function Select".
Data setting range (s)
Increment (s)
* "0000" indicates that no operation will be performed at the set speed.
・Each function is valid only when the setting is "3" to "4" in "P045: Multi Speed
Function Select".
・The inverter will not operate at the set speed when the setting is "0000".
Multi-speed operation using timer will be performed only at the speed for which
time is set with P071 to P078.
If data is changed during operation, the data will become valid only after the
next cycle arrives.
Related parameters: P045 to P052, P061 to P070
208
Speed Runtime
Speed Runtime
Speed Runtime
Speed Runtime
st th
to 8 speed frequency can be set when the setting is "3" or
0000·0.1 to 6553
0.1(0.1 to 999.9),
1(1000 to 3600)
th
P075
The 5
th
The 6
P076
th
The 7
P077
th
The 8
P078
Speed Runtime
Speed Runtime
Speed Runtime
Speed Runtime