3.2 Removal and Installation of Terminal Cover
■ Removal and Installation of Terminal Cover 1 (Terminal Cover for Control
Circuit )
〔Removal〕
〔Installation〕
■ Removal and Installation of Terminal Cover 2 (Terminal Cover for Main
Circuit )
〔Removal〕
〔Installation〕
While holding the center bottom edge of the
①
terminal cover 1 and pull it up lightly.
Insert the mounting jaw of terminal cover 1
②
into the slot on the casing, then lightly press
down the center bottom edge of the terminal
cover 1.
Terminal cover 1
While holding the center part of the terminal
①
cover 2, pull it up lightly until the mounting jaw
releases.
Insert the mounting jaw of terminal cover 2
②
into the slot on the casing, then lightly press
down the terminal cover 2.
3. Wiring
Mounting jaw (two)
27