Continuous Operation Times Of Timer - Panasonic VF200 Instruction Manual

Appendix Function Parameter List
P068

Continuous Operation Times of Timer

Continuous operation times of timer in one cycle can be set by using the 1
th
8 speed operation as "timer operation cycle" when the setting is "3" to "6" in
"P045: Multi Speed Function Select".
Data setting range
(times)
* "0000" indicates that there is no limit to operation times. After run command
is input, the operation will keep on until stop command is input.
・This function is valid only when the setting is "3" to "6" in "P045: Multi-Speed
Function Select".
・If data is changed during operation, the data will become valid only after the
next cycle arrives.
Related parameters: P045, P069 to P070
P069 Continuous Operation Mode of Timer
Continuous Waiting Time of Timer Operation
P070
Operation mode and continuous waiting time of timer operation from the end
st
of the 1 cycle to the 2
"P045: Multi Speed Function Select".
If continuous operation mode of timer is set to "1", continuous waiting time of
timer operation will become invalid.
206
0000·1 to 9999
nd
cycle can be set when the setting is "3" to "6" in
st
to