Panasonic VF200 Instruction Manual page 220

12
Setting
value
13
・The setting value "5" and "6" are used to set delay time of current detection
signal with "P096: Current Sensing Delay Time".
・The setting value "10" is used to output the time set with "P070: Continuous
Waiting Time of Timer Operation".
・Output frequency ratio or output current ratio of setting value "13" can be set
with parameter P097. Setting value "13" can only be used to set
open-collector output 1 (TR1).
Related parameters: P070, P093, P095 to P097
Speed search
12
operation signal
Output status
-
signal
Appendix Function Parameter List
When speed search starts, the
open-collector output is ON; when
the speed search completes, the
open-collector output is OFF.
PWM signals in proportion to output
frequency or output current will be
output.
213