Recoil Frequency Band In Winding Mode; Pulse Input Signal Frequency - Panasonic VF200 Instruction Manual

Appendix Function Parameter List
P171

Recoil Frequency Band in Winding Mode

Percent of recoil frequency for frequency amplititude set with parameter P170
can be set with this parameter.
Setting range (%)
P172 Winding Mode Cycle
Time required for one cycle of winding mode control operation and the
acceleration time in one cycle can be set with these parameters.
■ Winding Mode Period
Setting range (sec)
■ Rise Time Coefficient in Winding Mode
Setting range (%)
The formulas of acceleration/deceleration time below can be acquired via
setting of P172 and P173.
Rise time of triangular-wave frequency = winding mode cycle (s) × rise time
coefficient of winding mode (%)
Drop time of triangular-wave frequency = winding mode cycle (s) × (100 -
rise time coefficient of winding mode (%))
P174

Pulse Input Signal Frequency

It is used when set "P87: PWM/pulse frequency signal select" to "2".
Please set pulse input count per second (pulse frequency) when it is max output
frequency.
Setting range (Hz)
272
0.0% to 100.0%
P173
0.0~3600
0.0~100.0
1~10000（Setting unit：1Hz）
Rise Time Coefficient in
Winding Mode