Parameter Verification Function - Panasonic VF200 Instruction Manual

8.5 Parameter Verification Function

Refers to the function of making comparison and verification between setting
values of function parameters in the unit and those in built-in memory of
operation panel. The comparison and verification will start after setting value
"VEr" is set.
How to verify the parameters
1. Press button to stop the inverter.
2. Press button four times.
(If a password is set beforehand, please enter it. Refer to
parameter P150. )
3. Press button.
4. Press
／
5. Press button.(Display the current settings.)
6. Press button to change the displayed value to "VEr".
7. Press button to start verification.
The displayed value (VEr) is flickering during verification.
● If different data is checked out
If different data is checked out, displayed parameter No. will
flicker.
In this case, press
while button to display data in built-in memory of
operation panel.
Press button to start verification from the next data again.
Press button to stop verification and "CPY3" is displayed.
After verification completion, "End" is displayed.
8. Setting Modes and Copy Functions of Built-in Memory
button to select "CPY3".
button to display data in the unit
109