2.4 Removal and Installation of Operation Panel
Do not connect the inverter or operation panel to PC or other devices via a LAN
cable.
Or other devices may be damaged.
〔Removal〕
〔Installation〕
Cut off the power supplied to operation panel before
removing it.
Do not remove the operation panel frequently.
Otherwise, malfunction may occur.
While holding the center top and bottom part of the
①
operation panel, pull it up vertically to remove it.
While holding the center top and bottom part of the
②
operation panel, align mounting position (align
transverse slot on operation panel with flange on the
casing) and press down vertically to install it.
Note) After installation, confirm that the operation panel is
fitted in position.
VF200
2. Installation
23