Waiting Time; Reverse Run Lock; Stop Mode - Panasonic VF200 Instruction Manual

P026

Waiting Time

Waiting time required by the start mode, the ride-through restart and retry
function can be set.
Data setting range (s)
Related parameters: P022 to P025
P027

Reverse Run Lock

When used only in forward run mode, reverse run can be disabled to avoid
possible mishandling.
Setting value
0
1
・When disabled, reverse run cannot be performed during the operation of
panel, external control and communication.
Related parameter: P004
P028

Stop Mode

Ramp-to-stop or coast-to-stop mode can be selected when stopping the
inverter.
Setting value
0
1
0.1 to 100.0
Details
Reverse run operation enabled
(Both forward run and reverse run
operation enabled)
Reverse run disabled
(Only forward run operation enabled)
Mode
The inverter is stopped by the stop signal
Ramp-to-stop
depending on the frequency decreased according
to the deceleration time.
The inverter output is shut off immediately by the
Coast-to-stop
stop signal.
Appendix Function Parameter List
Details
167