Parameter P022: Retry Function; Parameter P023: Retry Count - Panasonic VF200 Instruction Manual

Appendix Function Parameter List
P022
Retry Function
Retry Count
P023
The retry function can automatically reset the fault and restart (run) operation
after waiting time has elapsed when an inverter fault trip occurs. Please use
this function to continue the operation.

■ Parameter P022: Retry Function

Setting value
0
1
2
3

■ Parameter P023: Retry count

Data setting range (times)
162
When the retry function is used, the unit may
automatically start (restart) suddenly, so do not
approach the unit. (Please take measures to ensure
personal safety.)
Failure to do so may lead to injury.
Retry function disabled (retry is not performed.)
Perform retry operation only for overcurrent fault and heat sink abnormal
overheating (SC1/SC2/SC3/SC4/SC5/SC6/OC1/OC2/OC3).
Perform retry operation only for overvoltage fault (OU1/OU2/OU3).
Perform retry operation only for overcurrent fault and heat sink abnormal
overheating (SC1/SC2/SC3/SC4/SC5/SC6/OC1/OC2/OC3) and
overvoltage fault (OU1/OU2/OU3).
1 to 10
Details