Panasonic VF200 Instruction Manual page 85

5. Control Status Monitor
n014
PID Setting Value (SP)
PID Measured Value (PV)
n015
PID Output Value (MV)
n016
For displaying setting value (SP), measured value (PV) and output value (MV)
under PID control. The unit is "%".
n017 Progress of Automatic Tuning
For showing progress of automatic tuning when automatic tuning is set with
"P106: PID Control Mode".
The initial value is "0" and "1" to "5" is displayed depending on the progress.
When automatic tuning completes, the display will return to initial value "0".
"0" to "5": measurement in progress; "6": measurement completed (End); "7":
measurement stopped (Err)
n018 Accumulative Operation Time
Accumulative Operation Time of Fan
n019
"n018" shows the accumulative power-on time of inverter. "n019" shows the
accumulative operation time of inverter cooling fan. "P143: Cooling Fan
ON-OFF Control" is set to "1": In synchronized operation, no counting will be
executed when the cooling fan is stopped.
The basic display unit is "0.001" corresponding to 1 hour. The display increment
is "0.01" corresponding to 10 hours for the time longer than 10.0; and "0.1"
corresponding to 100 hours for the time longer than 100.0; and "1"
corresponding to 1000 hours for the time longer than 1000.0.
As certain errors exist in the displayed values, they are just for your reference.
78