Separating The Crankcase Halves - Ducati SCRAMBLER 800 Workshop Manual

Separating the crankcase halves

Remove the engine from the frame (Removing the
engine).
Remove the clutch cover (Removing the clutch
cover).
Remove the complete clutch unit (Removing the
clutch).
Remove the oil pump (Removing the oil
pump).
Remove the generator cover (Removing the generator
cover).
Remove the heads (Removing the engine
heads).
Remove the cylinder (Removing the cylinder/piston
assembly).
Remove the starter motor idler gear (Removing the starter motor idler
gear).
Use two screwdrivers to remove the snap ring (1) from the timing layshaft (2) on the clutch-side crankcase
half.
Loosen crankcase half jointing screws (3), (4) and (5) on generator side.