Table of Contents
Advertisement
3-12 Ah batteries: leave to stand for at least 30 min.
Over 12 Ah batteries: leave to stand for at least 1 hour.
Set the cap strip on the filler holes without securing it. Recharge the battery as described in the paragraph
"Recharging the
battery".
Note
When using an automatic battery charger, ensure that the charger current (ampere) is equal to or higher
than the value of the standard charging system (STD) indicated on the battery itself.
Press firmly downwards with both hands until the caps are firmly in place (do not use a hammer).
Advertisement
Table of Contents
