Table of Contents
Advertisement
Fit tool part no. 88713.011 and ensure the two tool pins match the two slots on crankcase following the
same procedure as for
position.
With the valve in the rest position, slide a feeler gauge between opening rocker arm and shim to measure
the clearance. The clearance must be within the specified limits:
Opening rocker arm
INTAKE
Assembly
Inspection
EXHAUST
Assembly
Inspection
"Changing the
belts". Turn the crankshaft so that the valve to be inspected is in rest
0.10÷0.15 mm
0.10÷0.15 mm
0.10÷0.15 mm
0.10÷0.15 mm
Advertisement
Table of Contents
