Fit on the crankshaft the washer (21), duly lubricated, roller bearing cage (20) and the internal ring (19) so
that the latter is centred in the washer.
Install the flywheel-rotor-driven gear assembly on the crankshaft ensuring not to move the internal ring
(19) in washer (21).
The flywheel assembly must be positioned with the reference sign aligned with the crankshaft groove, near
the key seat.
Use engine oil to lubricate the mating surfaces of the belleville washer (16).
Fit the belleville washer (16) on the end of the crankshaft.
Smear both crankshaft threading and flywheel nut one (15) with specified threadlocker.