Checking The Flywheel/Generator Assembly; Disassembling The Flywheel/Generator Assembly - Ducati SCRAMBLER 800 Workshop Manual

Hide thumbs Also See for SCRAMBLER 800:

Table of Contents

Checking the flywheel/generator assembly

Inspect the inner part of generator rotor for signs of damage.

Check that the starter clutch is working properly and that the roller races do not show signs of wear or

damage of any kind.

Disassemble the unit if you find faulty operation.

Unscrew the eight screws (22) and remove the generator rotor (26) from the flywheel (23).

Working on the opposite side, loosen the four screws (24) and remove the flange (26).

Remove the starter clutch (27).