Table of Contents
Advertisement
Odometer (TOT)
The odometer counts and displays the total distance covered by the motorcycle with the set unit of
measurement (km or mi).
The odometer number (in km or miles) is displayed with the message TOT and the indication of the unit of
measurement.
When the maximum value is reached (199999 km or 199999 mi) the instrument panel will permanently
display said value.
The odometer value is saved permanently and cannot be reset under any circumstances.
The reading is not lost in case of a power OFF (Battery OFF).
Note
Upon Key-ON, the instrument panel always shows the Odometer indication for 10 seconds, then shows the
user's settings page.
Note
If a string of flashing dashes " ----- " is displayed within odometer function, please contact a Ducati Dealer
or Authorised Service Centre.
Odometer Update
The DUCATI diagnosis instrument allows performing a series of activations to check some instrument panel
functions and resetting parameters or warning lights. After each activation, the instrument panel will
restore its standard functions.
Note
The activations must be performed only with key turned to ON, engine off and battery voltage ≥ 11.0 V.
This function allows copying the km value saved in the odometer when replacing the instrument panel or
the engine control unit (ECU).
When replacing the instrument panel or the engine control unit (ECU), it is necessary that the authorised
dealer copies (*) the km value to the new control unit using the DDS Diagnosis Instrument.
Until this procedure is performed, the instrument panel display will show some flashing dashes "-----"
instead of the Odometer value.
The procedure is successfully completed when the display shows the odometer value. (*): for the
"procedure" to be followed with the DDS instrument to be added in the Workshop Manual, contact the
SERVICE.
Advertisement
Table of Contents
