Overhauling The Pressure Plate; Pusher Plate Springs - Ducati SCRAMBLER 800 Workshop Manual

Overhauling the pressure plate

Check bearing (12) conditions: replace the bearing if the play is excessive.
Check the contact surface of the last friction plate; if extremely scored, polish it in the same manner as
described previously for the cylinder head surface
Check the condition of the spring guide seats (13) of pusher plate (5).

Pusher plate springs

(L) can indicate two lengths:
uncompressed length = 56.19;
-
working length = 42.6.
-
(Overhauling the cylinder head
components).