Table of Contents
Advertisement
Refitting the front brake system
Upon the system refitting, pay attention to the orientation of the hose unions on the master cylinder and on
the callipers.
Warning
If incorrectly positioned, hoses can affect brake operation and foul moving parts. Position the component as
shown in the figure.
Values to be respected
X=35°
Y=60°
When reconnecting the brake line to the calliper or master cylinder, make sure to install the seals (2) on
either side of the hose end union.
After having aimed the hose union (4), tighten screw (1) to the torque of 23 Nm ±10%.
Advertisement
Table of Contents
