Removing the flywheel/generator assembly
Fix tool (A) part no. 88713.2036 to the mounting holes (14) of side stand.
Secure the tool to the flywheel with the suitable screws.
Loosen nut (15) securing the generator flywheel by heating it up with an "industrial heating gun";
we recommend not to use naked-flame heating methods that could damage the starting components.
Warning
While unscrewing the nut, apply axial pressure to the socket to avoid damage or injury in the event of the
wrench suddenly slipping off the nut.
Remove nut (15), belleville washer (16) and the flywheel assembly (17) with gear (18).