0.10
-
0.20
no.1 shim (0.10 mm)
0.50
no.1 shim (0.20 mm)
Important
The shims with greater size have to be fitted on the swinging arm right-hand side.
The thinner shim must always be in contact with the swinging arm.
Do NOT fit shims with size equal to 0.1 on the left side.
The maximum value of the set of shims on the left must be 2mm (1.8+ 0.2max.)
The maximum swinging arm rear end play is within 1 mm.
no.1 shim (0.10 mm)
no.1 shim (0.10 mm)
no.1 shim (0.20 mm) + no.1 shim (0.1 mm)