Table of Contents
Advertisement
If the described conditions are not met, restore them as follows:
Remove protection caps (7) and (8) and loosen adjuster (10) lock nut (9).
To increase distance (A), increase the free play by tightening adjuster (10) and then working adjuster
•
(3).
To decrease distance (A), decrease the free play by loosening adjuster (10) and then working adjuster
•
(3).
Tighten lock nut (9) to the specified torque while holding adjuster (10) and bring protective caps (7) and
(8) back in place.
Repeat all the tests.
Advertisement
Table of Contents
