Refitting the camshafts
If previously removed, fit seal (12) in its seat on the cylinder head right side using a suitable drift.
Important
If valve rocker arms are installed in the cylinder head, to insert the camshaft it is necessary to rotate the
camshaft until the cams reach a position that does not interfere with the rocker arms.
Before fitting the camshaft, check the punched letter on the shaft: "V" stays for vertical whereas "O" stays
for horizontal.
Lubricate the camshaft seats and "tank" (13) and (A) so that during the first engine rotations the camshaft
is lubricated.