Refitting the clutch cover
Clean and degrease cover and casing mating surfaces. Check that the casing features the centring bushing
(7).
Apply an even, regular bead of DUCATI sealing compound (A) on the mating surface of the crankcase half
and around all holes.
Bring cover near the crankcase half and, operating on clutch cover lever, make sure that clutch control pin
is duly inserted inside its seat on cover.
Start the fastening screws (2), (3) and (4) inside the clutch cover.
Ref.
Quantity
2
3
3
1
Description
M 6 x 80
M 6 x 90