Reassembling the gearbox assembly
To refit the gearbox components follow the procedure under chapter
"Closing the
crankcase" relating to the
reassembly of the crankcase.
As a final practical test, ensure that with the gearbox in neutral the front coupling dogs (A) of sliding gears
(B) are equidistant on both sides with respect to the corresponding coupling dogs on the fixed gears (C).
Check also that there is always a small amount of clearance between fork (D) and relative groove (E) on
sliding gear (B) when engaging the gears.
Refit the engine in the frame
(Refitting the
engine).