Refitting The External Components - Ducati SCRAMBLER 800 Workshop Manual

Refitting the external components

Check the condition of O-rings (3) and replace them if necessary.
Install the blow-by valve (2) in the crankcase along with O-rings (3), previously lubricated.
Tighten screw (1) to a torque of 10 Nm (Min. 9 Nm - Max. 11 Nm).
Fit nuts (5) on nipples (4).
Apply recommended threadlocker to the plug thread (4). Tighten nipples (4) to a torque of 32 Nm (Min. 29
Nm - Max. 35 Nm).