Refitting the clutch
If the hub - plates - drum assy (9) was disassembled, take special care to clutch plate positioning upon
reassembling.
Insert the clutch plate pack on hub:
The plate pack (9) consists of:
11 driving plates (A) with 2.8 mm thickness;
-
6 driven plates (B) with 2 mm thickness;
-
1 convex driven plate (C) with 1.5 mm thickness;
-
3 driven plates (D) with 2.5 mm thickness.
-
Fit the clutch plate pack with hub inside drum.
Fit the two service pins.
Fit the spacer (11) to the clutch housing (10).