Removing the front sprocket
Undo the screws (2), and remove the chain cover (1).
Slacken the chain
(Adjusting the chain
tension).
Remove the chain using tool (X) part no. 88713.1344.
The tool consists of a holder (A), a punch (B), a body (C) and two wrenches (D) and (E).
Fit the link to be opened into the holder (A).
Fit the punch (B) into the body (C) and manually undo the screw until the punch no longer protrudes.
Fit the holder (A) and the link into the body (C).
Manually turn the bolt (F) on body (C) so that the punch (B) gets against the pin, taking care that they are
aligned. Fit the hexagon wrench (D) into the hexagonal part of the body (C) and the wrench (E) onto the
bolt.
Turn clockwise the bolt (F) until the pin comes out.