Vehicle pre-delivery
Transport packaging integrity visual check (where applicable).
•
Transport packaging removal (where applicable).
•
Motorbike integrity visual check.
•
Check of the supplied kit completeness (refer to the parts list supplied together with the kit).
•
•
Rear-view mirror assembly
•
Battery start-up
battery);
Final drive correct tensioning check.
•
Tyre pressure check (Front 2.5 bar - 2.6 bar with passenger / Rear 2.5 bar - 2.8 bar with passenger).
•
Check brake fluid level (top up, if necessary).
•
Check engine oil level (top up, if necessary).
•
Lights, turn indicators, horn and controls check. Headlight beam height adjustment check. Check
•
handlebar free movement and possible interference.
Check key and steering lock operation.
•
Check front and rear wheel shaft tightening (front: 63 Nm ± 5% - Rear: 145 Nm ± 10%).
•
Check the brake calliper retaining screws tightening (front: 45 Nm ± 5% - Rear: 14 Nm ± 5%).
•
Fuel top-up until the reserve warning light turns off (approx. 3 litres).
•
Check engine stop switch, side stand switch and clutch lever operation.
•
Check the presence of any technical updates and recall campaigns on DCS.
•
Install any Ducati Performance accessories required by Customer's order and check their operation.
•
Final test and road test of the motorcycle (test correct operation of safety devices and electric fan).
•
Reading of the error memory with DDS 2.0 and check of software version update on control units (use
•
the Global Scan function).
Motorcycle cleaning.
•
Motorcycle warranty activation and on-board documentation filling in (General warranty conditions).
•
Turn in to Customer the documentation and the Service Booklet (appropriately filled in).
•
(Refitting the rear-view
(Recharging the
battery-
mirrors).
electrolyte) and fitting on the vehicle
Topping up the
(Refitting the